Wednesday, January 31, 2007

TX200 Field Target Stock

I've got several underlever type guns in the works for some of the FT guys. I've spent a considerable amount of time rethinking some of the adjustable hardware pieces. Main concerns are ease of use, and most importantly strength and rigidity. I've prototyped some new hardware, and put the pieces through the ringer trying to find fault, readjusted, remade, and tested some more till I came up with the newest configuration of pieces that will be used in the newer stocks.Here's a prototype piece coming together for a TX200 action. (Pardon the crappy picts, as we have been dodging snow squalls, and freezing temps for the last several days, and it will be quite a few more before better weather does make it's way in for some better picts...)

Right now the stock is only at 80grit, so there is work left to be done. Features include a removable knee/palm rest, which slides in a beefy accessory rail on the belly of the stock. There is quite a few adjustments in this piece that will allow the end user to tailor the fit to their needs. Tweaking the center of gravity is also possible here... Right now I have it set up so that the center of balance, action mounted w/scope, is right at the front of the palm rest, which allows the gun to just sit in my hand while shooting off hand (testing fit and feel in the shop). Cheek is adjustable up and down, right and left. Length of pull is adjustable, as is up down, and toe in/out on the pad. I tend to use a shorter LOP while crunched up in the seated FT position, as opposed to shooting off hand.Removing the knee rest carves off enough weight to allow me to use the gun off hand for hunting or plinking without sacrificing anything in the ergo's dept. Brings the weight right into the range of the HW97 in a factory lam stock, but with better balance and improved hand position.

After a bit more test fitting and playing, I decided to make the adjustments on the new hardware a tool free affair. Who wants to be fiddeling with tools while squating in an FT lane preparing for a shot?

The same type of knob was also added to the butt pad assembly. Adjustments are now a quick one handed affair. I also provided some additional fasteners in discreet locations that will allow one to really lock everything solidly in place when they find their own personal sweet spot(s). Unlocked, one can quickly remove the knee rest with a twist of a knob, and if you're like me, go from shooting paper, to stripping the gun down in a couple of seconds, and head out into the back woods to bust some squirrel heads.


The completed stock features an adjustable length of pull, toe in/out and hieght on the pad. Adjustable cheek piece for hieght, as well as right/left orientation. Full anitomical grip with a thumbs up trough in addition to the through hole. The knee/palm rest adjusts for hieght, forward/backward as well as axis orientation. The rest is quickly removable via a hand knob. LOP and hieght of the knee/palm rest are adjusted using a tool free hand knob. All posts are marked for quick reference between adjustments, which makes it easy to go from a knee shot to an off hand shot, back to an off the knee shot, returning the rest to your original possition in a matter of seconds. Also really good if you go from a flat shot, to one with lots of uphill inclination. A quick drop of the rest will keep you heads up without having to lean way back to get the angle.

Saturday, January 27, 2007

Rapid Stocks










Friday, January 26, 2007

Rapid MK2 Storm



Rapid MK2 Barstow


Rapid MK2 Terminator


Rapid MK2 Bradford


Rapid MK2 WildKat- Apache Gold Laminate


Rapid MK2 Yellow Jacket


Rapid MK2 Wildkat








Rapid MK2 Camo




TX200 SR





TX200 Lefty






TX200 Ultimate FT




TX200 FT Lite



TX200 Adjustable Target Stock



Thursday, January 25, 2007

HW97 Pro Hunter


S200 Target




R11 Pro Hunter


Pot Belly


R9 Stocks





R9 Wilderness


R9 Bristol


R9 Pro Hunter



R9 Raptor


R9 Camo